|
Projects
Overseas Projects - 9 Years Experience
Kamtech Services Inc. - Senior Site Superintendent on a 900T/D Ahlstrom Bleach Plant build for SAPPI in RSA. (1994-1995)
ERDC Ltd. - Consulting Engineer for PT Suma Lindo Lestari Jaya Jakarta, Indonesia and Samarinda. (1991)
HPN - Site Consulting Engineer/Commissioning Manager for SAPPI's new 1200T/D state of the art pulp and paper complex located in Ngodwana, RSA. This complex included a new Voith/Beloit three wire, Kraft Liner board machine, a new 1100 meters/min. Beloit paper machine, as well as a new Gotarverken Recovery Boiler, Kamyr continuous digester, CE coal fired power boiler, UHDE Chlorine plant, coal and wood handling facilities, pulp machines, Liquor Prep. Area including Lime Kiln, tanks, Effluent Treatment, Ground Wood Plant, Rail Roads and all temporary facilities required in Ngodwana, RSA. (1981-1985)
H.A., Simons Overseas Ltd. - Senior Site Consulting Engineer located in Ruzomberok, CSSR. This is where a new Pulp Mill Wood Handling Facility and B&W Recover Unit were built. (1979-1981)
H.A., Simons Overseas Ltd. - Senior Site Manager for Jari, Brazil and Daniel K. Ludwigs's Floating Mill. (1976-1978)
United States Projects - 14 Years Experience
ERDC Ltd.
- Red Dog Mine - 2007
- Simpson Paper Company Plant - Construction Manager and later project Director for the Pulp Mill Improvement in the United States (except in 1994) at the Simpson Paper Company Plant in Pasadena, Texas. Included was the Recover Boiler Rebuild, the Kusters System was installed on existing Coated Machine Super Calendars and a new Sunds Brown Stock Washing Facility for Hardwood and softwood Lines (Bleach Plant Upgrade). (1992-1997)
Gotaverken Energy Systems Ltd. - Construction Manager for GESL, on the new Federal Paper Company Chemical Recovery Unit, which is located in Augusta, Georgia. This included site preparations, lime kiln and liquor prep facilities and evaporators. (1986-1987)
Chas T. Main Inc. - Site Resident Engineer or Construction Manager while working on various improvements in the United States. (1967-1976)
- 1974-1976 - St. Regis Paper in Bucksport, Maine
- Paper Machine and TMP Expansion
1973-1974 - Brown Paper in Berlin, New Hampshire
- Chipping, screening, batch digester and effluent treatment system expansion.
- 1972-1973 - Scott Paper in Chester, Pennsylvania
- Yankee dryer and finishing facilities.
- 1971-1972 - Finch Pruyn in Glen Falls, New York
- Mist Eliminators in addition to existing C.E. boilers, bleaching screening and washing expansion.
- 1969-1972 - South Forest Industries in Snowflake, Arizona
- B&W 500T/D, chemical recovery boiler, Wood room expansion, paper machine rebuild (No. 2), Lime kiln and liquor prep area expansion.
- 1968 - Scott Paper in Mobile, Alabama
- No. 11 Paper machine and Finishing Machine expansion.
- 1967 - Franconia Paper in Lincoln, New Hampshire
- Digester (batch), Brownstock washing and wood room improvements.
Canadian Projects - 16 Years Experience
ERDC Ltd.
- Geco Wilroy Project - Manitouwadge, Ontario.
- Kamtech Services - Construction Manager for Kamtech Services Inc. on the Weyerhaeuser Dryden, Ontario Air Emissions Project. Project is presently 4 months ahead of schedule and is under budget. (April 2001 - October 10, 2004)
- KEI Construction - Construction Manager for KEI Construction on the Peroxide Plant Expansion in ACI Fort Frances, Ontario. This project was completed 78 days early with a smooth fast start up, there was 0 accident and 0 lost time. Completed in April 2001.
- Ahlstrom Machinery Group - Labor Relations Manager and Site Co-coordinator for Ahlstrom Machinery Group, on the KC Mill conversion of a B&W Recovery Boiler to an Ahlstrom unit. New bottom, super heaters, screen tubes, wind boxes, Port Rodder System, burners and generating bank tubes. This job was completed in 1999, in Abercrombie Point, NS.
- Ahlstrom Machinery Group - Senior Site Superintendent for Ahlstrom Machinery Group on the Andritz TMP plant installation at Stora, Port Hawkesbury, NS. (1997-1998)
- REPAP - Construction Manager for Pulp Mill improvements for REPAP located at Newcastle, NB. This included new experimental ALCELL Plant and three Wet Lap Machines. (1985-1995)
Chas T. Main Inc. - Various Pulp and Paper Projects including new Scott Mill at NS. (1965-1967)
|